P20 Steel Plate

We are a globally applauded stockiest, trader, supplier and importer of P20 Steel Plate, P20 Alloy Steel Plate. This superior quality item is made in compliance with all the stringent quality standards of the international domain. Top quality steel is used to fabricate a broad spectrum as per required specifications and quality expectations of our valuable clients. This P20 Alloy Steel Plate is properly inspected to ensure maximum durability and efficiency at customers end. Our offered gamut is adored by patrons for corrosion resistance and cost effectiveness.

Chemical Composition :- 

• Carbon : 0.40%
• Manganese : 1.00%
• Molybdenum : 0.35%
• Chromium : 1.20%
• Silicon : 0.40%

Physical Properties :-

• Specific Gravity : 7.86
• Density : 0.284 lb/in3 (7861 kg/m3)
• Modulus of Elasticity : 30x106 psi
• Machinability : 60 to 65% of a 1% Carbon steel
• Mechanical Properties(Metric) :-
• Hardness, Brinell (typical) : 300
• Hardness, Rockwell C (Typical) : 30
• Tensile Strength, yield : 827  862 MPa
• Tensile Strength, ultimate : 965  1030 MPa
• Elongation at break : 20%
• Charpy impact : 27.1  33.9 J
• Compressive strength : 862 MPa
• Poisson's ratio : 0.27  0.30
• Elastic modulus : 190  210 GPa
• Thermal Properties :-
• Thermal expansion : 12.8x10-6/C @ 20-425C
• Thermal Conductivity : 24 Btu/ft/hr/F

Applications :- 

• This steel is used for low temperature applications that include die casting dies and injection molds.
• Used for die holder, rames for plastic pressure dies, backers, plastic moulds, shafts, wear strips etc.